Best used when
The bottle, cap and output target fit this machine route better than a generic capper or a fully bespoke line.
High-speed inline capping
Automatic Belt Spindle Screw Capping Machine
High-speed inline belt/spindle screw capper for round plastic bottles, with guided side-belt transport and cap feeding options.
Output3000–5000 BPH
ClosureScrew caps
ContainerBottle Ø35–120mm, height 60–200mm
Utilities110/220V, 50–60Hz, 2kW
Machine intent
Automatic belt spindle screw capping for inline bottle lines
This page is focused on belt and spindle screw capping where bottle control, cap tightening and conveyor flow are important. It is a strong route for higher-output screw, pump and spray-cap projects when cap geometry suits the machine.
Details to confirm
Send cap samples, bottle samples, closure dimensions, tube length where relevant and the target output so tooling and configuration can be checked.
Next step
Use the quote form or call Lancing to compare this machine against the other trigger capping and spray bottle capping options.
Machine overview
Key points for specification
High-speed inline belt/spindle screw capper for round plastic bottles, with guided side-belt transport and cap feeding options.
- Guiding conveyor clamps bottles for stable torque application
- Touchscreen HMI for parameter setup and recipe control
- Continuous inline motion for higher throughput
- Cap elevator or vibratory bowl options available
Applications
Typical project fit
This machine is normally considered where the closure family, output target and container format need a practical balance between automation, operator involvement and changeover flexibility.
Food and beverage bottlesCosmetic bottlesHousehold chemical bottlesIndustrial liquids
Specifications
Reference technical specification
Final machine configuration, guarding, conveyor height and options should be confirmed against your actual bottle and cap samples.
| Reference model | LU-XG440B |
|---|---|
| Voltage | 110/220V, 50–60Hz |
| Power | 2kW |
| Capacity | 3000–5000 BPH |
| Bottle diameter | 35–120mm |
| Bottle height | 60–200mm |
| With cap elevator | Approx. 3453 × 1393 × 2243mm |
Before quotation
Information to send with your enquiry
Better samples and project data reduce guesswork and make the first proposal more accurate.
Bottle and cap samples
Send photos, drawings or physical samples showing cap diameter, closure style, thread and dip-tube length where relevant.
Output target
Confirm target bottles per minute or bottles per hour, plus whether the line is manually loaded or fully automatic.
Line layout
Confirm available footprint, conveyor height, upstream filling equipment and downstream labelling or packing stages.
Related machines
Compare other capping options
Pro automatic trigger capping
Automatic Trigger Sprayer Capper for Cleaning & Care Bottles
Automatic trigger-sprayer capping system for cleaning, care and chemical bottles requiring stable cap presentation and repeatable closure control.
- Output
- 1200 BPH
- Closure
- Trigger sprayer, customisable
Pro cap feeding and orientation
Trigger Spray Cap Feeder Lid Feeding Equipment
Vibratory bowl trigger-spray cap feeding and placement equipment for bottles with soft dip tubes and awkward trigger closure geometry.
- Output
- 20–25 BPM
- Closure
- Trigger caps approx. Ø15–35mm
Automatic spray and pump capping
Automatic Screw Capping Machine for Spray & Pump Bottles
Pneumatic inline screw capping machine for spray, pump and screw-cap bottles with adjustable fixtures and repeatable torque control.
- Output
- 20–60 bottles/min
- Closure
- Caps Ø18–70mm
Compact automatic capping
Compact Screw Capping Machine
Space-saving screw capper for smaller production areas, laboratories and compact lines running sprays or standard screw caps.
- Output
- Approx. 20–40 bottles/min
- Closure
- Caps Ø18–70mm
Semi automatic capping
Semi Automatic Screw Capping Machine
Desktop semi-automatic screw capper with automatic bottle clamping, manual/automatic cycling and stable torque control for smaller batches.
- Output
- 20–60 bottles/min format-dependent
- Closure
- Caps Ø20–60mm, custom up to 90mm
Need this configured for your product?
Send bottle, cap, closure sample and output target to Lancing UK.
Spindle application check
Confirm that cap presentation and thread start are solved before high-speed spindle tightening
The LU-XG440B reference capacity of 3,000–5,000 BPH applies to compatible bottle and cap formats under suitable feed and transfer conditions. A trigger sprayer may still need a dedicated feeder, placement or pre-threading stage before the spindle belts can tighten it reliably.
| Area | Selection question | Trial evidence |
|---|---|---|
| Cap presentation | Is the closure already seated and aligned when it reaches the spindle wheels? | No dropped, cocked or unthreaded caps entering the tightening zone. |
| Pre-threading | Does the cap need a separate thread-start action before progressive wheel contact? | Clean thread engagement across normal cap and neck variation. |
| Side-belt support | Can the bottle be gripped without distortion, scuffing or loss of vertical alignment? | Stable bottle passage at production fill weight and required conveyor speed. |
| Spindle contact | Which wheel material, height, pressure and speed suit the closure surface? | Required tightening without unacceptable marking or actuator damage. |
| Torque verification | How will removal or application torque be measured and sampled? | Documented gauge, method, timing and project-specific acceptance window. |
| Stop and restart | What happens to bottles and caps already between side belts or wheels? | Affected packs identified, cleared or rechecked before accepted production resumes. |
| Changeover | Which rails, belts, wheels, heights and recipes change between formats? | Settings sheet, first-off approval and stable run on each required SKU. |
For detailed generic spindle-wheel and side-belt guidance, use Spindle Cappers UK. Keep this page focused on the verified LU-XG440B reference and the extra checks needed when trigger or pump closures are involved.
Spindle capper questions
Questions about the automatic belt spindle capper
What conditions apply to the 3,000–5,000 BPH reference?
The range assumes compatible bottle and cap formats, stable cap supply, clean thread engagement, continuous transfer and the agreed accepted-quality criteria.
Can a spindle capper handle trigger sprayers?
It may tighten a compatible trigger closure, but orientation, dip-tube handling, placement and pre-threading may require dedicated upstream equipment.
Why are side belts important?
They stabilise the bottle and resist rotation while the spindle wheels act on the closure. Contact must suit the bottle material, shape and filled weight.
How is cap marking controlled?
Wheel material, pressure, speed, alignment and closure cleanliness all affect marking. Approved appearance samples should be part of the trial criteria.
How is torque checked on a spindle line?
Use a repeatable calibrated method and a defined sample timing. The acceptable range must come from the pack requirement, not a generic machine value.
What must change for another bottle size?
Guide rails, side-belt spacing/height, spindle height, wheel settings and conveyor or recipe parameters may need adjustment and first-off approval.